2022 Good Quality Aluminium Formwork System - Formwork System Phenolic Film Faced Plywood with WBP Glue boiled 72hrs – Sampmax

Product Detail

Product Tags

Feedback (2)

We normally believe that one's character decides products' quality, the details decides products' high-quality ,while using the REALISTIC,EFFICIENT AND INNOVATIVE staff spirit for H Frame Scaffolding, Scaffold Coupler, Heavy Duty Caster, Our final target is "To consider the most effective, To be the Best". Please experience cost-free to call with us if you have any prerequisites.

2022 Good Quality Aluminium Formwork System - Formwork System Phenolic Film Faced Plywood with WBP Glue boiled 72hrs – Sampmax Detail:

Features
Size: 1220*2440mm, 1250*2500
Thickness: 12mm 15mm 18mm 21mm,25mm
Core Veneer: Poplar Core, Eucalyptus Core, Combined
Face & Back: Phenolic Black Film, Phenolic Brown Film, Dynea Film
Glue: WBP/WBP Melamine/MR
Standard: GB/T 17656-2018, AS 6669, EN-13986

Formwork System Phenolic Film Faced Plywood with WBP Glue boiled 72hrs

Film Faced Plywood refers to the plywood film faced with film. The film covered on both side of plywood and after hot pressed in order to make sure the plywood a smooth surface, bright gloss, waterproof, fireproof, and excellent durability (weather resistance, corrosion resistance, chemical resistance) and anti-fouling ability.

Using film faced plywood to make the concrete surface smoother, which can easier dismantle the formwork and avoid secondary dusting, greatly improving work efficiency and saving manpower and materials.

Film faced plywood can be used with formwork as a slab formwork system components or wall formwork system components, and is more often used for unregular slab parts. This kind of coated plywood can be used for slab formwork that does not require concrete surface effects. High temperature resistant waterproof glue is usually used. The wood species can be poplar or hardwood. The phenolic resin coating of about 120-200g/m² is variously used on both sides. The conventional size is 4′x8′ and the thickness is 9-21mm.

Sampmax Construction Film faced plywood is phenolic film faced plywood which up to 25 times reuses with a wide range of thicknesses and sizes.

details-of-film-faced-plywood

Specifications
Sampmax Construction film faced plywood normally use poplar core, hardwood core or combi core, the phenolic film on both side can be black or brown, glue is WBP. Sealed edges.
Surface
Sampmax Construction film faced plywood coating weight is 120-200g/m2 both sides.
Face and reverse: Brown phenolic film combination or Black film combination or Anti-slip film.
Edge sealing: Water resistant paint edge sealed.
Panel size
Size: 600/1200/1220/1250 mm x 1200/2400/2440/2500mm
Thickness: 9-21mm
Glue type
Melamine+Phenolic 24 hours boil test glue.
WBP Phenolic 72 hours boil test glue.
Tolerances
Thickness tolerances: +/-0.5
Other tolerances:
The panel can have more or less dimensional changes due to changes in the air humidity.
End uses
Usage mainly for slab forms/install flooring/vehicle.
Typical number of reuses for slab forms is likely to be about 5 -25 times.
However, the number of reuses will depend on a wide range of factors including good site practice, the required concrete finish, careful handling & storage of forms and the type and quality of release agent.
Certificate
EN 13986:2004 Certificate
ISO 9001 Certificate

Datasheet of Plywood

Thicknesses and weight of Poplar Plywood

Nominal thickness (mm)	Layers (veneer)	Min. thickness (mm)	Max. thickness (mm)	Weight (kg/m2)
9	5	8.5	9.5	4.95
12	7	11.5	12.5	6.60
15	9	14.5	15.5	8.25
18	11	17.5	18.5	9.90
21	13	20.5	21.5	11.55

Data Properties of Poplar plywood

Property	EN	Unit	Standard value	Value of test
Moisture content	EN322	%	6—14	8.60
Number of plies	—–	Ply	—–	5-13
Density	EN322	KG/M3	—–	550
Bonding Quality	EN314-2/class3	Mpa	≥0.70	Max: 1.85 Min: 1.02
Longitudinal Bending Modulus of elasticity	EN310	Mpa	≥6000	7250
Lateral Bending Modulus of elasticity	EN310	Mpa	≥4500	5190
Longitudinal Bending Strength N/mm2	EN310	Mpa	≥45	63.5
Lateral Bending Strength N/mm2	EN310	Mpa	≥30	50.6

Thicknesses and weight of Eucalyptus Plywood

Nominal thickness (mm)	Layers (veneer)	Min. thickness (mm)	Max. thickness (mm)	Weight (kg/m2)
15	11	14.5	15.2	8.70
18	13	17.5	18.5	10.44
21	15	20.5	21.5	12.18

Data Properties of Eucalyptus Plywood

Property	EN	Unit	Standard value	Value of test
Moisture content	EN322	%	6—14	7.50
Number of plies	—–	Ply	—–	11-15
Density	EN322	KG/M3	—–	580
Bonding Quality	EN314-2/class3	Mpa	≥0.70	Max: 1.80 Min: 1.03
Longitudinal Bending Modulus of elasticity	EN310	Mpa	≥6000	7856
Lateral Bending Modulus of elasticity	EN310	Mpa	≥4500	5720
Longitudinal Bending Strength N/mm2	EN310	Mpa	≥45	62.1
Lateral Bending Strength N/mm2	EN310	Mpa	≥30	59.2

QC of Plywood

Sampmax Construction attaches great importance to the maintenance of product quality. Each piece of plywood is supervised by specialized personnel from the selection of raw materials, the specifications of glue, the layout of the core board, the high-pressure laminating veneers, the laminating process, including the selection of the finished product. Before large packaging and loading cabinets, our inspectors will check every piece of plywood to ensure that all products and processes are 100% qualified.

Film-faced-plywood-raw-material