Manufacturer for Concrete Wall Form Systems - Wood H20 Beam for building formwork system – Sampmax


Product Detail

Product Tags

Related Video

Feedback (2)

Our firm aims to operating faithfully, serving to all of our consumers , and working in new technology and new machine continually for Jack Base, Film Faced, Film Coated Plywood, Our firm quickly grew in size and reputation because of its absolute dedication to superior quality manufacturing, substantial price of solutions and fantastic customer services.
Manufacturer for Concrete Wall Form Systems - Wood H20 Beam for building formwork system – Sampmax Detail:

Features
Wood Flange: pine, web: poplar
Glue: WBP Phenolic Glue, Melamine Glue
Thickness: 27MM/30MM
Flange Size: Thickness 40MM, width 80MM
Surface Treatment: with water proof Yellow painting
Weight: 5.3-6.5kg/m
Head: sprayed with waterproof paint or red plastic toe cap or iron sleeve, etc.
Wood humidity: 12%+/-2%
Certificate: EN13377

wood-H20-Beam-for-slab-formwork-system

Wood H20 Beam for building formwork system

The wooden H beam is a lightweight structural component with solid sawn timber as the flange, multi-layer board as the web, and weather-resistant adhesive to form an H-shaped cross-section, and the surface is painted with anti-corrosion and waterproof paint.

In the formwork project of cast-in-place reinforced concrete structures, it can be used with film faced plywood and vertical supports to form a horizontal support formwork system. With multi-layer slabs, diagonal braces and diagonal bolts, it can form a vertical formwork system.

The most prominent features of wooded H beams are large rigidity, light weight, strong bearing capacity, which can greatly reduce the number of supports, expand the spacing and construction space; convenient disassembly, flexible use, easy to assemble and disassemble on site; low cost, durable and repeatable the utilization rate is high

A beam is placed horizontally on the two supports. When the beam receives downward pressure perpendicular to the axis, the beam will bend. Compression deformation occurs at the upper part of the beam, that is, compressive stress occurs, and the closer it is to the upper edge, the more serious the compression; the tension deformation occurs at the lower part of the beam, that is, tensile stress occurs, and the closer to the lower edge, the more serious the tension.

The middle layer is neither stretched nor compressed, so there is no stress, and this layer is usually called the neutral layer. Since the neutral layer has little contribution to bending resistance, I-beams are often used in engineering applications instead of square beams, and hollow tubes are used instead of solid columns.

Wood

Flange: pine, web: poplar

Glue

WBP Phenolic Glue, Melamine Glue

Thickness

27MM/30MM

Flange Size

Thickness 40MM, width 80MM

Surface

Treatment with water proof Yellow painting

Weight

5.3-6.5kg/m

Head

sprayed with waterproof paint or red plastic toe cap or iron sleeve, etc.

Wood humidity

12%+/-2%

Certificate

EN13377

The I-beam is an important component in the internationally-used building formwork system. It has the Specifications of light weight, high strength, good linearity, resistance to deformation, surface resistance to water, acid and alkali, etc., and can be used throughout the year and cost amortization. Inexpensive, it can be used with domestic and foreign professional template system products.
It can be widely used in horizontal formwork system, vertical formwork system (wall formwork, column formwork, hydraulic climbing formwork formwork, etc.), variable arc formwork formwork system and heterogeneous formwork formwork system.
The wood beam straight wall formwork is a removable formwork, which is easy to assemble and can be assembled into various sizes to a certain extent and extent.
The template is flexible in application. The rigidity of the formwork is very convenient, and the height of the formwork can be poured more than ten meters at a time. Due to the light weight of the formwork material used, the whole formwork is much lighter than the steel formwork when assembled.
The system product components have a high degree of standardization, good reusability, and meet environmental protection requirements

Slab Beam Technical Data

Name

LVL wood H20/16 Beam

Height

200mm/160

Width of Flange

80mm

Thickness of Flange

40mm

Web thickness

27mm/30mm

Weight per running meter

5.3-6.5kg/m

Length

2.45, 2.65, 2.90, 3.30, 3.60, 3.90, 4.50, 4.90, 5.90m, <12m

Wood humidity

12%+/-2%

Bending moment

Max.5KN/m

Shear force

Min 11.0KN

Bending

Max 1/500

Live Load(Bending stiffness)

Max 500KN/M2

H20 Beam (2)
setup-of-H20-Beam


Product detail pictures:

Manufacturer for Concrete Wall Form Systems - Wood H20 Beam for building formwork system – Sampmax detail pictures

Manufacturer for Concrete Wall Form Systems - Wood H20 Beam for building formwork system – Sampmax detail pictures

Manufacturer for Concrete Wall Form Systems - Wood H20 Beam for building formwork system – Sampmax detail pictures

Manufacturer for Concrete Wall Form Systems - Wood H20 Beam for building formwork system – Sampmax detail pictures

Manufacturer for Concrete Wall Form Systems - Wood H20 Beam for building formwork system – Sampmax detail pictures


Related Product Guide:

With our excellent administration, potent technical capability and strict top quality control technique, we go on to provide our consumers with trusted quality, reasonable price ranges and fantastic providers. We intention at becoming one among your most trusted partners and earning your fulfillment for Manufacturer for Concrete Wall Form Systems - Wood H20 Beam for building formwork system – Sampmax , The product will supply to all over the world, such as: Myanmar, Danish, Kyrgyzstan, All styles appear on our website are for customizing. We meet up to personal requirements with all products of your very own styles. Our concept is to help presenting the confidence of each buyers with the offering of our most sincere service, and the right product.
  • The factory technical staff gave us a lot of good advice in the cooperation process, this is very good, we are very grateful.
    5 Stars By Ivy from Panama - 2018.11.11 19:52
    This manufacturers not only respected our choice and requirements, but also gave us a lot of good suggestions, ultimately, we successfully completed the procurement tasks.
    5 Stars By Carol from Kenya - 2017.03.07 13:42
    Write your message here and send it to us